2008 Acura TL Owner's Manual - Page 294

Main Menu Table Of Contents Engine Coolant, Windshield Washers 3. The coolant level should be up to the base of the filler neck. Add coolant if it is low. Pour the coolant slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. 4. Put the radiator cap back on and tighten it. 5. Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank. Do not add any rust inhibitors or other additives to your vehicle's cooling system. They may not be compatible with the coolant or engine components. Windshield Washers Check the fluid level in the windshield washer reservoir at least monthly during normal use. On Canadian models: If the fluid level is low, a ''WASHER FLUID LOW'' message will be shown on the multiinformation display. RADIATOR CAP Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather. When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition the blade edges. Maintenance 1. When the radiator and engine are cool, relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down. 2. Remove the radiator cap by pushing down and turning counterclockwise. CONTINUED 291 2008 TL