2008 Acura TL Owner's Manual - Page 301
2008 Acura TL Manual
Page 301 highlights
Main Menu Table Of Contents Lights 4. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Turn on the lights to test the new bulb. 7. (Driver's side) Install the upper part of the air intake duct. 8. (Driver's side) Install the engine compartment corner cover, and secure it with two fastener pins. 9. Install the engine compartment side cover. 1. Start the engine. If you are replacing a driver's side bulb, turn the steering wheel all the way to the right. If you are replacing a passenger's side bulb, turn the steering wheel to the left. Turn off the engine. Replacing the Front Turn Signal/ Parking Light Bulb 2. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 3. Remove the bulb by turning it onequarter turn counterclockwise. 298 2008 TL