2008 Acura TL Owner's Manual - Page 302
2008 Acura TL Manual
Page 302 highlights
Main Menu Table Of Contents Lights 4. Remove the bulb from the socket by pushing it in and turning it counterclockwise until it unlocks. 5. Install the new bulb in the socket. Turn it clockwise to lock it in place. 6. Insert the socket into the headlight assembly. Turn it clockwise to lock it in place. 7. Test the lights to make sure the new bulb is working. Maintenance Replacing a Front Fog Light Bulb 2. Use a flat-tipped screwdriver to remove the holding clips from the edge of the inner fender cover, and pull the inner fender cover back. 3. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 8. Push the inner fender cover in place. Install the holding clips, and lock them in place by pushing on their center. 1. Start the engine. If you are replacing a driver's side bulb, turn the steering wheel all the way to the right. If you are replacing a passenger's side bulb, turn the steering wheel to the left. Turn off the engine. CONTINUED 299 2008 TL