2008 Acura TL Owner's Manual - Page 323

Main Menu Table Of Contents Changing a Flat Tire WHEEL NUT WRENCH WHEEL NUT WRENCH EXTENSION 6. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 7. Locate the jacking point nearest the tire you need to change. It is pointed to by an arrow molded into the underside of the body. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 8. Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 320 2008 TL