2008 Acura TL Owner's Manual - Page 65

Main Menu Table Of Contents Instrument Panel Indicators Turn Signal and Hazard Warning Indicators The left or right turn signal indicator blinks when you signal a lane change or turn. If an indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see page 298 ). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling. When you press the hazard warning button, both turn signal indicators and all turn signals on the outside of the vehicle flash. Daytime Running Lights Indicator If this indicator comes on when the ignition switch is turned to the ON (II) position and the parking brake is released, it means there is a problem in the circuit. Have your vehicle checked by your dealer. High Beam Indicator This indicator comes on with the high beam headlights. See page 86 for information on the headlight controls. Lights On Indicator This indicator reminds you that the exterior lights are on. It comes on when the light switch is in either the or position. This indicator will also come on when the light switch is in AUTO and the lights turn on automatically. If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position without turning off the light switch, this indicator will remain on. A reminder chime will also sound when you open the driver's door. 62 2008 TL