2007 BMW 6 Series Owner's Manual - Page 103

3. Select the menu item and press the controller: > "Night Vision off": Deactivate BMW Night Vision. > "Zoom": At higher speeds, the image is zoomed in. > "Curve mode": Depending on the steering angle and other parameters, the image sections follow the course of the road to some degree. > "Full screen": The image is shown on the entire Control Display. > "Contrast": The contrast of the screen can be adjusted. > "Brightness": The brightness of the screen can be adjusted. "Curve mode" can only be activated with the "Zoom" function switched on. With "Full screen" activated, "Curve mode" and "Zoom" cannot be selected.< The settings are stored for the remote control currently in use. To exit the menu: The image will automatically disappear after approx. 5 seconds. When the windshield is cleaned with the headlamps on, the camera lens area is automatically sprayed as well. Refer to page 66. Cleaning camera 101 Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG Reference The function of the camera may be affected by heavy rain and fog, dirt, snow or ice on the lens. When this occurs, the displayed image on the Control Display may become gray. Mobility Communications Entertainment Navigation Driving tips Controls To minimize icing, the camera lens is automatically heated. However, it may be necessary to clean the camera lens manually under severe weather conditions. When doing so, cautiously remove any debris, ice or snow. To avoid damage to the lens, do not use sharp or abrasive instruments to clean ice, snow, or dirt off the lens. At a glance