1993 Buick Park Avenue Owner's Manual - Page 155

Press the PWR button or turn the ignitionkey off to stop the discplayer. The disc staysin the player and will resume playing at the point where it stopped. Step 2. Turn the ignitionto the ACC or RUN position. Step 3. Press PWR to turn the radio off. Step 4. Press preset 1 and 4 buttons together. Hold them until "---" shows on the display (atleast 5 seconds). You are now ready to enter your secret code. If you pause more than 15 seconds between steps you may have to start over. Step 5. Press SET and "000"will appear on the display. of Step 6.Press SEEK and hold it until the first digit your code appears. Step 7. Rotate the tune knob right or left to make the next two numbers agree with your code. Step 8. Press AM-FM knob and "000" will appear. Now you are ready to enter thesecond three digits of the code according to steps 6 and 7. Step 9. Press the AM-FM knob. The display will show "rEP" for 5 seconds, and then "OOO" will appear indicating that some steps are to repeated for verification. be Step 10. Repeat steps 6,7,and 8. Step 11. Press the AM-FM knob. If the display shows "SEC", the verification process was successful and the system is SECURE. If the display shows "---", the verification steps were not successful and the entire sequence must be started again. EJECT Press EJCT, the discwill eject and the radiowill play. The discwill start attrack 1 when you reinsert it. As a feature to protect the disc, you turn the ignition off if with the disc partway out the slot (after eject), will be of it drawn back into the playerin about 30 seconds. The disc will play at track 1 when the radio is turned on again. Anti-Theft Feature Delco-Loc I1 is a security feature for the compact disc player. It can be used or ignored. If ignored, thesystem plays normally. If it is used,your player won't be usable if it's ever stolen,because it won't turn on. The instructions below tell you how to enter your personal secret code into the system. If your vehicle loses battery power for any reason, you must unlock the system with the secret code again before the system will turn on. Be sure toread through the entire procedure and become familiar with the appropriate buttonsand knobs before starting. Step 1. Write clown any 6-digit number and keep it in a safe place.