1993 Buick Park Avenue Owner's Manual - Page 270

1 Loading Your Vehicle Tm TIRE-LOADING INFORMATION OCCUPANTS VEHICLE CAP. WT. FRT. CTR. RR. TOTAL LBS. KG.~ ~~ . . ~ accessed. Two of the taillamp bulbs are on a tabbed assembly. Squeeze the release in and pull the assembly out. Pull the bulb straight out from the socket. To replace theassembly, the tabs must be inserted into the slots. Push the other end in until it locks into place. To replace the third taillamp bulb and sidemarker bulb, turn the socket 1/4 turn and pull it out. Pull the bulb straight out from the socket. The backup bulb can be replaced by squeezing the lock on the socket, turning it l/4 turn and pulling it out. Pull the bulb straight out. Reverse the above steps to reassemble thelight and the trunk trim. MAX. LOADING & GVWR SAME AS VEHICLE CAPACITY WEIGHT XXX COLD TIRE PRESSURE TIRE SPEED SIZE PSVKPa RTG FRT. RR. SPA. IF TIRES ARE HOT, ADD 4PSV28KPa SEE OWNER'S MANUAL FOR ADDITIONAL The taillamp, sidemarker and back-up lights can now be INFORMATION l l ] m \ : l .$$;;r#,: \ M Two labels on your vehicle show how much weight it may properly carry. The Tire Loading Information Label found on the rear edge of the driver's door tells you the proper size, speed rating and recommended inflation pressures for the tires on your vehicle. It also gives you important information about the number of people that can be in your vehicle and the total weight that you can carry. This weight is called the Vehicle Capacity Weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. 268