1995 Buick Century Owner's Manual - Page 201

Wagon Spare Cover Replacement To install the spare tirecover in your station wagon when you are finished changing the tire: 1. Put the front lower corner of the cover into the floor track. Overlap the lower rear edge of the front panel one to two inches. 2. Slide the cover to the front; the tabs must go under the rear edge. Compact Spare Tire Although the compact spare was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 kPa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure your spare tire is correctly inflated. The compact spare is made to perform well at posted speed limits for distances up to 3,000 miles ( 5 000 km), so you can finish your trip and have your full-size tire repaired or replaced where you want. Of course, it's best to replace your spare with a full-size tire as soon as you can. Your spare will last longer and be in good shape in case you need it again. 3. Insert the front upper corner into the track, at the bottom of the glass. 4. Adjust the position of the cover to fit overthe weatherstrip. Push the panel down into the track in the floor. 5 . Push the panel to lock it into the track of the molding at the bottom of the glass. ~ NOTICE: compact spare can get caught on the rails. That can damage the tire and wheel, and maybe other parts of your vehicle. I Don't take your compact spare through an 1 automatic car wash with guide rails. The 5-35