1995 Buick Century Owner's Manual - Page 46

If this label is o n the lap-shoulder belt, your vehicle has Lap-Shoulder Belt System A. Read 1-35 through 1-37 to see how to secure a child restraint properly. If the label isn't on the lap-shoulder belt, your vehicle has Lap-Shoulder Belt System B. Read 1-37 and 1-38 to see how to secure a child restraint properly. Until you have this clip, secure achild restraint only in a seat that has a separatelap belt (and a way to anchor a top strap, if the child restraint has one). See the following part about securing a child restraint in a center position. Once you have the clip, followthese instructions: 1. Put the restraint on the seat. Follow the instructions for the child restraint. 2. Secure the child in the child restraint as the instructions say. Lap-Shoulder Belt System A You'll be using the lap-shoulder belt. See the earlier part about the top strap if the child restraint has one. You'll need a safety locking clip to properly secure a child restraint in this position. You can get a locking clip where child restraints are sold, or from your Buick dealer (GM Part Number 94844571). The locking clip must be the same as the one shown here. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. Tilt the latch plate to adjust the belt if needed. If the shoulder belt goes in front of the child's face or neck, put it behind the child restraint. 4. Buckle the belt. Make sure the release button is positioned so you would be able tounbuckle the safety belt quickly if you ever had to. 1-34