1996 Buick LeSabre Owner's Manual - Page 65

Vehicles are delivered programmed in Mode 5 . To change to another mode: 1. Press and hold the power door lock switch. 2. Press theopened trunk button on the transmitter. The transmitter will remain in its current mode. The delayed locking feature can be turned on or off for each remote transmitter. To turn the feature on: 1. Press and hold the power door lock switch throughout this procedure. All the doors will lock. 3. Press the opened trunk button again. Each time the opened trunk button is pressed,the transmitter will advance to thenext mode. 4. Release the power door lock switch. 2. Press the UNLOCK button on the remote transmitter. The lock delay is still off and all doors will remain locked. 3. Press the UNLOCK button on the remote transmitter again. Lock delay is now active and all doors will unlock. Delayed Locking (Option) Note: This featureis available onlyif you request your dealer to activatethis option. After initial activation, you can turn this feature on and off by using the following procedure. 4. Release the power door lock switch. the To turn this feature off, repeat previous procedure. If your vehicle is not equipped with the Remote Keyless Entry, use the following procedure to turn the feature on: This feature lets thedriver delay the actual locking of the vehicle. When the power door lock switch is pressed with 1. With the ignition on, press and hold the power door the key removed from the ignition, and the driver's door lock switch. All doors will lock. open, a chime will sound three timesto signal that the lock delay mode is active. When all doors have been closed, the 2. Toggle the headlamps switch seven times (off to on is one toggle). The doors will unlock to confirm that doors will lock automatically aftertive seconds. If any the feature is now on. door is opened before this, the five-secoxld timer will reset itself once all the doors have been closed again. 3. Release the power door lock switch. Pressing thedoor lock switch twice within two seconds To turn the feature off, repeat the previous procedure. will override this feature. 2-9