1997 Buick Century Owner's Manual - Page 297

Headlamps 4. Connect the new headlamp assembly to the wiring harness, making sure the connector tab snaps into place. 5. Insert the headlamp into the slots in the fascia. 6. Slide the retainers downward until they are fully seated. Front Parking and Turn Signal Lamp 1. Remove the headlamp assembly. Refer to the removal procedure earlier in section. this 2. Remove rubber bulb access cover. 3. Twist and pull the sidemarker lamp socket from the headlamp assembly. 4. Holding the base of the bulb, pull the bulb from the socket. 5. Push the new bulb into the socket. 1. Pull up on the headlamp retainers to release the assembly locator tabs. 2. Slide the headlamp assembly out of the slots. 6. Put the socket back into the headlamp assembly and turn it to the right until it is secure. 7. Replace the rubber bulb access cover. 3. Lift the plastic locking tab onthe electrical connector and pull the connector from the headlamp bulb socket. 6-31