1997 Buick Century Owner's Manual - Page 299

TaiVStop/Turn Signal Lamp 1. Remove the three plastic wing nuts (A). (Pliers may be required to remove the wing nuts.) 2. Pull the taillamp housing away from the body of the vehicle (B). 3. Squeeze the tab on the socket and turn the socket right to left. 4. Pull out the socket. 5. Pull the bulb out of the socket. (There are two bulbs on each taillamp.) 6. Push in a new bulb. 7. Replace the socket into the housing and turn to the right. A A 8. Replace the taillamp housing to the body of the vehicle. 9. Install the wing nuts. 4 10. Tighten the plastic nuts. 6-33