1997 Buick Park Avenue Owner's Manual - Page 125

1997 Buick Park Avenue Manual

Page 125 highlights

It will operate garage doors and gates, or other devices controlled by radio frequency such as home/office lighting systems. The transmitter will learn and transmit the frequencies of most current transmitters and is powered by your vehicle's battery and charging system. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Your vehicle's engine should be turned off while programming your transmitter. Follow these steps to program up to three channels: 1. If you have previously programmed a universal transmitter channel, proceed to Step2. Otherwise, hold down the two outside buttons on the universal transmitter until the amber light begins to flash rapidly (approximately 20 seconds). Then release the buttons. This procedure initializes the memory and erases any previous settings for all three channels. 2. Hold the end of your hand-held transmitter against the bottom surface of the universal transmitter so that you can still see the amber light. Programming the Transmitter Do not use the universal transmitter with any garage door opener that does not have the"stop and reverse" safety feature. This includes any garage door opener model manufactured before April 1, 1982. Be sure that people and objects are clear o the garage f door you are programming! 3. Decide which oneof the three channels you want to program. Using both hands, press the hand-held transmitter button and the desired button on the universal transmitter. Continue to hold both buttons through Step 4. 4. Hold down both buttons until yousee the amber light on the universal transmitter first flash slowly, then rapidly. The rapid flashing, which could take up to 90 seconds, indicates that the universal transmitter has been programmed. Release both buttons once the light starts to flash rapidly. 2-65

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.