1997 Buick Park Avenue Owner's Manual - Page 176

Your tape bias is set automatically. If E and a number appear on the radio display, the tape won't play because of an error. The SEEK down and up arrows will also find the previous and next selections on the tape. ElO: The tape is tight and the player can't turn the tape hubs. Remove the tape. Hold the tape with the open end down and try to turn the right hub counterclockwise with a pencil. Turn the tape over and repeat. If the hubs do not turn easily, yourtape may be damaged and should not be used in the player. Try a new tape to make sure your player is working properly. E l l : The tape is broken. Try a new tape. If any error occurs repeatedly or if an error can't be corrected, please contact your dealer. If your radio displays an error number, write it down and provide it to your dealer when reporting the problem. 44 (3): Press this button to reverse the tape rapidly. Press it again to return to playing speed. The radio will play while the tape reverses. (4): Press this buttonto advance quickly to another part of the tape. Press the button again to return to playing speed. The radiowill play while the tape advances. , , SIDE (5): Press this button to change the side of the tape that is playing. RAND (6): Press this button to reduce background noise when playing a cassette tape. The double-D symbol will appear in the display. SOURCE: Press this button to change to the tape or disc function when the radio is on. If both a tape and a disc are installed, the system will first go to tape play; TAPE SIDE and an arrow will appear on the display. If SOURCE is pressed again, the system will go to disc play; CD PLAY will appear on the display. EJECT The system has two EJECT buttons. Press the button near the CD slot to remove a disc. Press the button near the tape slot to remove a tape and the radio will play. If you leave a cassette tape in the player while listening to the radio, it may become warm. PREV (1):Press this button to search for the previous selection on the tape. Your tape must have at least three seconds of silence between each selection for PREV to work. The sound will mute while seeking. NEXT (2): Press this button to search for the next selection on the tape. Your tape must have at least three seconds of silence between each selection for NEXT to work. The sound will mute while seeking. 3-24