1997 Buick Park Avenue Owner's Manual - Page 301

Front Turn Signal The front turn signal bulbs can be accessed by removing the headlamp assembly as described in the previous procedure. Once the headlamp assembly has been removed, reach down from the top of the vehicle and, while pressing the locktab on the socket, turn the socket one-quarter of a turn and pull it out. 5. Reverse the above steps to reassemble the lamp assembly. When reassembling the lamp, make sure to align the pin at the outboard edgeof the headlamp assembly to the plastic retainer at the outboard edge the vehicle. of Remove the old bulb by pulling it straight out of the socket. Replace the bulb and turn the bulb assembly back into place. 6-37