1997 Buick Regal Owner's Manual - Page 309

Headlamps 3. Lift the plastic locking tabon the electrical connector andpull the connectorfrom the headlamp bulb socket. 4. Connect the new headlamp assembly to thewiring the harness, making sure connector tab snaps into place. 5. Insert the headlamp into the slots the fascia. in 6. Slide the retainers downward until they are fully seated. Front Parking and Tbrn Signal Lamp 1. Remove the headlampassembly. Refer to the removal procedure earlier this section. in 2. Remove rubber bulb accesscover. 3. Twist and pull the sidemarker lamp socket from the headlamp assembly. 4. Holding the base of the bulb, pull the bulb from the socket. 1. Pull up on the headlamp retainers to release the assembly locator tabs. 5. Push the new bulb into the socket. 2. Slide the headlamp assembly of the slots. out 6. Put the socket back into the headlamp assembly and turn it to the right until it is secure. 7. Replace the rubber bulb access cover. 6-33