1997 Buick Regal Owner's Manual - Page 88

Press and hold the power door unlock switch. While holding the door unlock switch, press and release the RKE transmitter unlock switch. Thiswill initialize the customization mode. While in the customization mode, the chime will sound the number chimes of corresponding to the current Security Feedback unlock mode. Each additional press the RKE transmitter of unlock switch will cause your vehicle to advance the unlock mode by one, starting from the current unlock mode. If cycled beyond unlock Mode 4, the vehicle will enter unlock Mode 1. During thisprocedure, the chime will sound the number of chimes corresponding to the current unlock mode, providing you with feedback. When the doorunlock switch isreleased, the vehicle will remain in the most recent unlock mode. Both the lock and unlock Security Feedback functions will be in operating Mode when the vehicle is shipped from 4 the factory. Disconnecting the vehicle's battery for up to a year will not change the programmed mode of the lock and unlock Security Feedback functions. Illumination on Remote Activation This feature provides interior illumination when a remote keyless entry door unlock command is received and executed by your vehicle. Your vehicle's ignition must be off for the Illumination on Remote Activation feature to work. The interior lamps will illuminate until your vehicle's ignition is turned to the RUN position or until an illumination period of 40 seconds has elapsed. If a door is opened during the illumination period, the timed illumination will be canceled, and the interior lamps will remain on since a door is open. Instant Alarm This featureallows you to activate analarm by pressing a switch on the remote keyless entry transmitter. Your vehicle's ignition must be off for theInstant Alarm to work. When you press the special horn button on the remote keylessentry transmitter, your vehicle's headlamps will flash, the horn will honkrepeatedly, and your interior lamps will illuminate, attracting attention if you need it. The alarm will continue until: 1. You press the alarm button on the RISE transmitter a second time. 2. The vehicle's ignition is turned to the RUN position. 3. An alarm period of about two minutes has elapsed.