1999 Buick Park Avenue Owner's Manual - Page 105

yellowblue Perimeter Lighting When the UNLOCK button on the remote keyless entry transmitter is pressed, the daytime running lamps (high beams at reduced intensity), parking lamps and back-up lamps will come on if it is dark enough outside according to the twilight sentinel. This feature will only be activated when the security feedback feature is programmed to be in Modes 1, 3 or 5 on the transmitter. Modes 0, 2 and 4 do not respond with exterior lights flashing when unlocking the vehicle so perimeter lighting will not be active. This feature can be programmed on or off for each transmitter. To turn the feature off: 1. Press and hold LOCK on the door lock switch on the door throughout this procedure. All doors will lock. 2. Press the instant alarm button on the transmitter to enter the programming mode. Perimeter lighting remains on at this time and the horn will chirp two times. 3. Press the instant alarm button on the key transmitter again. Perimeter lighting is disabled and the horn will chirp one time. 4. Release the door lock switch. The perimeter lighting feature is now off. To turn the feature on: 1. Press and hold LOCK on the door lock switch on the door throughout this procedure. All doors will lock. 2. Press the instant alarm button on the key transmitter to enter the programming mode. Perimeter lighting remains off at this time and the horn will chirp one time. 3. Press the instant alarm button on the transmitter again. Perimeter lighting is now enabled and the horn will chirp two times. 4. Release the door lock switch. The perimeter lighting feature is now on. Perimeter lighting can also be activated through the optional Driver Information Center (DIC). See "Personal Choice Features" or "Driver Information Center" in the Index. 2-47