2000 Buick LeSabre Owner's Manual - Page 11

yellowblue Memory Seat and Mirrors (Option) When your vehicle is in PARK (P) and a memory button is pressed, a single beep will sound through the audio system and the memory position will be recalled. You can also store an exit position for each driver. The exit position is programmed by moving the seat to the desired exit position and then holding the exit button for five seconds. The exit position set will be for the most recently selected driving position (1 or 2). The exit position will be recalled when the exit button is pressed and will correspond to the driving position that was recalled last. The controls for the memory seat and mirrors are located on the driver's door panel, and are used to program and recall previous settings that have been stored. Adjust the driver's seat (including the lumbar adjustments) and both outside mirrors to the position you would like for driving. Then press and hold memory button 1 for five seconds. A double beep will sound when the memory is set. To set the seat and mirror positions for a second driver, follow the previous steps, but press button 2 instead. Note that selecting a new position with the memory button will change all other personal choice settings that you have previously programmed also. See "Personal Choice Programming" in the Index for further information. Memory recall will only work when the automatic transaxle is in PARK (P). 1-4