2000 Buick LeSabre Owner's Manual - Page 297

yellowblue Front Turn Signal Once the headlamp assembly has been removed from the vehicle, the front turn signal bulbs can be accessed. 1. Reach down into the space provided by the removal of the headlamp assembly and, while pushing in the tab on the bulb assembly, turn the assembly counterclockwise and remove it. 2. Remove the old bulb by pulling it straight out of the retainer. 3. Replace the bulb and turn the bulb assembly back into place. Trunk-Mounted Back-Up and Taillamps Cornering Lamps Follow the same procedure as used for replacing the headlamps. However, to remove the cornering lamp bulb, press the tab on the bulb assembly while turning the bulb assembly counterclockwise. Pull the bulb straight out. Replace the bulb and turn the bulb assembly back into place. 1. Loosen and remove the seven fasteners that hold the assembly in place. The assembly for both sides is one piece. The entire piece must be removed to replace any bulbs. 6-38