2002 Buick LeSabre Owner's Manual - Page 174

If you want to insert a tape when the ignition or radio is off, first press the eject button or DISP. Cassette tape adapter kits for portable compact disc players will work in your cassette tape player. Your tape bias is set automatically. If an error appears on the display, see "Cassette Tape Messages" later in this section. (Reverse): Press this pushbutton to reverse the 1 tape rapidly. Press it again to return to playing speed. The radio will play while the tape reverses. 2 (Forward): Press this pushbutton to advance quickly to another part of the tape. Press this pushbutton again to return to playing speed. The radio will play while the tape advances. 3 (Dolby): Press this pushbutton to reduce background noise. The double-D symbol will appear on the display. Dolby Noise Reduction is manufactured under a license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. 6 SIDE: Press this pushbutton to change the side of the tape that is playing. SEEK : Press the left or right arrow to go to the previous or next selection on the tape. Your tape must have at least three seconds of silence between each selection for seek to work. The sound will mute while seeking. To scan cassette tape selections, press and hold one of the SEEK arrows for two seconds until SCN appears on the display. You will hear a beep. The tape will go to the next selection, play for a few seconds, then go on to the next selection. Press one of the SEEK arrows again to stop scanning. The sound will mute and SCN will appear on the display while scanning. The cassette tape will only scan forward. AM FM: Press this button to listen to the radio when a tape is playing. TAPE: Press this button to play a tape when listening to the radio. (Eject): Press this button to eject a tape. Eject may be activated with the radio off. D 3-17