2003 Buick Century Owner's Manual - Page 115

Turn and Lane-Change Signals The turn signal has two upward positions for right and two downward positions for left. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically. If the arrow flashes faster than normal as you signal a turn or a lane change, a signal bulb may be burned out and other drivers won't see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and then check the fuse. See Fuses and Circuit Breakers on page 5-89. A chime will sound if you leave your turn signal on for more than 3/4 mile (1.2 km). 7 the instrument An arrow on panel cluster will flash in the direction of the turn or lane change. Headlamp High/Low-Beam Changer To change your headlamps from low beams to high beams, or high to low, pull the multifunction lever all the way toward you. Then release it. When the high beams are on this light, located on the instrument panel cluster, will also be on. To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. 3-6