2003 Buick LeSabre Owner's Manual - Page 131

S 7 n g Cruise Control c Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This, of course, shuts off the cruise control. But you don't need to reset it. Once you're going about 25 mph (40 km/h) or more, you can briefly press the RESUME/ACCEL (resume/accelerate) switch to return to your desired preset speed. You'll go right back up to your chosen speed and stay there. If you press and hold the RESUME/ACCEL switch, the vehicle will keep going faster until you release the switch or apply the brake. So unless you want to go faster, don't press and hold the RESUME/ACCEL switch. --~~ P leave your c se control on when you're not Using cruise, you might hit a button and go into cruise when you don't want to. YOU could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. IOU 1. Press the ON/OFF switch to turn cruise control on. An indicator light will come on in the switch to show that cruise control is on. 2. Get up to the speed you want. 3. Press the SET/COAST switch and the CRUISE light on the instrument panel cluster will illuminate. 4. Take your foot off the accelerator pedal. 3-10