2003 Buick LeSabre Owner's Manual - Page 307

3. Remove the headlamp assembly to access the bulbs. Front Turn Signal Lamps Once the headlamp assembly has been removed from the vehicle, the front turn signal bulbs can be accessed. 1. Reach down into the space provided by the removal of the headlamp assembly and, while pushing in the tab on the bulb assembly, turn the assembly counterclockwise and remove it. 2. Remove the old bulb by pulling it straight out of the retainer. 3. Install the new bulb and turn the bulb assembly back into place. Taillamps, Turn Signal, and Stoplamps 4. Turn the bulb retainer counterclockwise to remove it from the bulb assembly. 5. Pull the old bulb straight out from the retainer. Push the new bulb straight into the retainer. 6. Reverse Steps 1 through 4 to reinstall the headlamp 1. Open the trunk. Turn the screws located just inside of the trunk counterclockwise and remove them. 2. Remove the plastic trim piece from the trunk. 3. Pull the carpet away from the rear area to access the turn signal bulb assembly. assembly. 5-56