2003 Buick LeSabre Owner's Manual - Page 78

If your vehicle is equipped with the DIC, you must program this feature using it. See Driver information Center (DIC) on page 3-47. If your vehicle is not equipped with the DIC, do the following to change to another mode: 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 2. Press and hold LOCK on the driver's power door lock switch throughout this procedure. All the doors will lock. To verify the mode selected; remove the key from the ignition and close all of the doors after you've exited the vehicle. Press the lock button on the transmitter to be verified and confirm the appropriate feedback. Repeat with the unlock button. Matching Transmitter(s) to Your Vehicle Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have a maximum of four transmitters matched to it. See your dealer to have additional transmitters matched to your vehicle. 3. Press the trunk button on the transmitter. The security feedback wiii remain in its current mode. The horn will chirp as feedback. 4. Press the trunk button again. Each time the trunk button is pressed, the security feedback will advance to the next mode, and the horn will chirp. 5. Release the power door lock switch. The security feedback will remain in the most current mode selected. This prQcedL!reE!;/ ch2nges the MAdC1 f9r the transmitter used to change this setting. 2-7