2003 Buick LeSabre Owner's Manual - Page 92

Canadian Owners: If yo?! lose or danage your keysj only a GM dealer can service PASS-Key@Ill to have new keys made. To program additional keys you will need two current driver's keys. You must add a step to the following procedure. After Step 2, repeat Steps 1 and 2 with the second current driver's key. Then continue with Step 3. To program the new key, do the following: 1. Verify that the new key has PK3@ stampedon it. 5 ; The SEGlJRITY telltale light will turn off once the key has been programmed. It may not be apparent that the SECURITY light went on due to how quickly the key is programmed. 6. Repeat Steps 1 through 4 if additional keys are to be programmed. If you are ever driving and the SECURITY light comes on and stays on, you will be able to restart your engine if you turn it off. Your PASS-Key@Ill system, however, is not working properly and must be serviced by your dealer. Your vehicle is not protected by the PASS-Key@III system at this time. 2. Insert the current driver's key in the ignition and start the engine. If the engine will not start, see your dealer for service. 3. After the engine has started, turn the key to OFF, and remove the key. 4. Insert the key to be programmed and turn it to RUN within 10 seconds of removing the previous key. If you lose or damage a PASS-Key@Ill key, see your dealer to have a new key made. 2-2 1