2003 Buick Rendezvous Owner's Manual - Page 214

Auto Door LocMUnlock The doors will automatically lock when the vehicle is shifted out of PARK (P). For automatic unlocking, you can program your vehicle to one of the following modes: If the auto door unlock feature has been programmed to DRIVER or ALL, the automatic door unlock feature can also be programmed to one of the following modes: PARK: Unlock when the shift lever is put in PARK (P). KEY OUT: Unlock when the ignition key is removed. Before your vehicle was shipped from the factory, it was programmed in PARK. The mode to which the vehicle has been programmed may have been changed since it left the factory. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. OFF: When the shift lever is put in PARK (P), your doors will not unlock automatically. DRIVER: When the shift lever is put in PARK (P), only your driver's door will unlock. ALL: When the shift lever is put in PARK (P), all doors will unlock. Before your vehicle vms shipped from the facto?;, it was programmed in ALL. The mode to which the vehicle has been programmed may have been changed since it left the factory. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for "Entering Programming 2. Follow the instructions for programming AUTO DOOR UNLOCK to DRIVER or ALL listed previously. Mode" listed previously. 2. Make sure that the AUTO DOOR LOCK feature is programmed to ON. 3. Press the MODE button until AUTO DOOR UNLOCWPARK KEYOUT appears on the DIC. 4. Press the SFT button until the arrow is before PARK or KEY OUT. The mode you selected is now set. You can either exit programming mode by following the instructions later in this sectionor program the next feature available on your vehicle. 3. Press the MODE button until AUTO DOOR UNLOCK appears on the DIC. 4. Press the SET button until the arrow is before OFF, DRIVER or ALL. 3-63