2003 Buick Rendezvous Owner's Manual - Page 361

10. Put the bulb assembly back into the lamp housing and turn the bulb socket one-quarter of a turn counterclockwise. 11. Align the retaining clips on the back of the headlamp Taillamps, Turn Signal, and Stoplamps 1. Open the liftgate. 2. Remove the two screws on the inboard taillamp panel. with the rectangular holes in the mounting panel. 12. Push firmly on both ends of the headlamp to snap it into position. 13. Push the retaining clip down to its original position. 14. Reinstall the wing stud. Front Turn Signal, Sidemarker and Parking Lamps To replace the front turn signal, parking or sidemarker lamp bulbs, follow the headlamp bulb replacement procedure and replace the appropriate bulb. 3. Pull the lamp directly rearward from the vehicle. 4. Turn the bulb socket one-quarter of a turn counterclockwise. 5. Pull the bulb assembly out from the lamp housing. 6. Unhook the electrical connector by lifting up the tabs and separate the connector from the bulb base. 5-50