2004 Buick Rendezvous Owner's Manual - Page 139

Vehicle Personalization Memory Seat If your vehicle has this feature, the controls are located on the driver's door panel and are used to store and recall the driver's seat position and outside rearview mirror position. To recall your stored positions, your vehicle must be in PARK (P). Push and release the memory button (1 or 2) corresponding to the desired driving position. The seat and the outside rearview mirrors will move to the position previously stored for the identified driver. You will hear one beep. To store an exit position for each driver, do the following: 1. Move the seat to the desired exit position. 2. Hold the button with the exit symbol, located below the memory buttons, for more than three seconds. The exit position stored will be for the most recently selected driving position (1 or 2). A double beep will sound when the exit position is stored. To use the exit feature, your vehicle must be in PARK (P). Push and release the button with the exit symbol and the seat will move to the exit position stored for the most recently selected driver. You will hear one beep. To stop recall movement of the seat at any time, press one of the three memory buttons or one of the power seat controls located on the outboard side of the driver's seat. If your vehicle is equipped with a Driver Information Center (DIC), you can use it to program certain functions of the memory seats. See DIC Vehicle Personalization on page 3-64. To store a seat position, do the following: 1. Adjust the driver's seat and the outside rearview mirrors to the position you would like for driving. 2. Press and hold memory button 1 for more than three seconds. A double beep will sound when the memory seat and mirror position have been stored. To store the seat and outside rearview mirror positions for a second driver, follow the previous steps, but press button 2 instead. 2-49