2004 Buick Rendezvous Owner's Manual - Page 148

Turn Signal/Multifunction Lever Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, the lever will return automatically. An arrow on the instrument panel cluster and the HUD display will flash in the direction of the turn or lane change. The lever on the left side of the steering column includes the following: G Turn and Lane-Change Signals 5 Headlamp High/Low-Beam Changer Flash-to-Pass N Windshield Wipers L Windshield Washer I Cruise Control To signal a lane change, just raise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. As you signal a turn or a lane change, if the arrow flashes faster than normal, a signal bulb may be burned out and other drivers will not see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows do not go on at all when you signal a turn, check for burned-out bulbs and check the fuse. See Fuses and Circuit Breakers on page 5-109. 3-8