2004 Buick Rendezvous Owner's Manual - Page 375
2004 Buick Rendezvous Manual
Page 375 highlights
7. Install the new bulb into the electrical connector. Push the bulb firmly enough so that the tabs hook over the tab on the bulb. 8. Put the bulb assembly back into the lamp housing and turn the bulb socket one-quarter of a turn clockwise. 9. Reinstall the lamp to its pocket by lining up the mounting pin and pushing forward to set the position. 10. Reinstall the screws removed in Step 2. 11. Close the liftgate. Taillamps and Back-Up Lamps This procedure is for the liftgate-mounted taillamps and back-up lamps. 1. Open the liftgate. 2. Remove the panel inside the liftgate by lifting the tabs and pulling the panel off. 3. Remove the seven wing nuts and the four outboard nuts (two at each end). 4. Gently lower the liftgate. 5. Pull the lamp applique directly rearward from the vehicle. 5-53