2004 Buick Rendezvous Owner's Manual - Page 376

10. Put the bulb assembly back into the lamp housing and turn the bulb socket one-quarter of a turn clockwise. 11. Replace the applique on the liftgate. 12. Gently lift the liftgate. 13. Reinstall the seven wing nuts and the four outboard nuts. 14. Reinstall the panel inside the liftgate by connecting the tabs. 15. Close the liftgate. Replacement Bulbs A. Outboard Taillamp B. Center Taillamp C. Inboard Back-Up Lamp 6. Turn the bulb socket one-quarter of a turn counterclockwise. 7. Pull the bulb assembly out from the lamp housing. 8. Pull the bulb out of the base. 9. Install the new bulb into the electrical connector. Push the bulb firmly enough so that the tabs hook over the tab on the bulb. For any bulb not listed here contact your dealer. Lamp Front Turn Signal/Parking Lamps Headlamps High-Beam Headlamps Low-Beam Liftgate-Mounted Back-Up Lamps Liftgate-Mounted Taillamps Rear Outboard Stop/Tail/Turn Sidemarker Lamps Bulb Number 3457K 9005 9006 921 161 3057K 168 5-54