2008 Buick LaCrosse Owner's Manual - Page 179

2 (Gages)*: Press this button to display the battery voltage, oil life, and tire pressure readings. r (Set/Reset)*: 4 (Option)*: Press this button to set or reset certain functions and to turn off or acknowledge messages on the DIC. Press this button to display the units, language, personalization, compass zone, and compass calibration. See DIC Vehicle Personalization on page 3-76 and DIC Compass (Uplevel Only) on page 3-56 for more information. Trip/Odometer Menu Items TRIP/ODO (Trip Odometer): Press this button to scroll through the following menu items: Odometer Press the trip/odometer button until the odometer displays. This mode shows the distance the vehicle has been driven in either miles or kilometers. Trip A and Trip B Press the trip/odometer button until A or B displays. This mode shows the current distance traveled in either miles or kilometers since the last reset for each trip odometer. Both trip odometers can be used at the same time. The display will show the odometer on the top line and the trip odometer information, either A or B, on the bottom line. Each trip odometer can be reset to zero separately by briefly pressing the set/reset button on vehicles with the uplevel DIC or by briefly pressing and holding the trip odometer button on vehicles with the base level DIC while the desired trip odometer is displayed. t (Traction Control): Press this button to turn traction control on or off. See Traction Control System (TCS) on page 4-6 for more information. Press and hold this button to turn StabiliTrak® off, for vehicles with this feature. Press this button again to turn both traction control and StabiliTrak® on. See StabiliTrak® System on page 4-8 for more information. | (Hazard): Press this button to turn the hazard warning flashers on and off. See Hazard Warning Flashers on page 3-6 for more information. *These buttons are only available on vehicles with the uplevel DIC. **This button is only available on vehicles with the base level DIC. 3-51