2010 Buick LaCrosse Owner's Manual - Page 180

6-36 Infotainment System Power for auxiliary devices is not supplied by the radio system. To use the auxiliary inputs of the RSE system: 1. Connect the auxiliary device cables to the A/V jacks. 2. Power on both the auxiliary device and the RSE video screen. Changing the Source on the Video Display Screens The image from the auxiliary device can be switched between the video display screens. To change the display: 1. Press the AUX button on the remote control to change the source of both video screens from the DVD player to the auxiliary device. 2. Press the AUX button a second time to change the left video screen source to the DVD player and the right video screen to the auxiliary device. 3. Press the AUX button a third time to change the left video screen source to the auxiliary device and the right video screen to the DVD player. 4. Press the AUX button a fourth time to change the source of both video screens to the DVD player. How to Change the RSE Video Screen Settings The screen display mode, brightness, and language can be changed from the setup menu using the remote control. To change a setting: 1. Press 2. Battery Replacement To change the batteries: 1. Loosen the screw to the battery door located on the left side of the headphones. 2. Slide the battery door open. 3. Replace the two AAA batteries. 4. Replace the battery door and tighten the screw. Remove the batteries if the headphones are not going to be used for a long period of time. Audio/Video (A/V) Jacks If available, the A/V jacks are located on the rear of the floor console. They allow audio or video cables to be connected from an auxiliary device such as a camcorder or a video game system. The A/V jacks are color coded: ... z. Use n, q, p, o and r to select the settings. 3. Press z again to exit the setup menu. Yellow for video input. White for left audio input. Red for right audio input.