2010 Buick LaCrosse Owner's Manual - Page 197

Infotainment System 3. Say the entire number without pausing. . 6-53 Using the Digit Dial Command 1. Press . If the system recognizes the number, it responds with "OK, Dialing" and dials the number. If the system does not recognize the number, it confirms the numbers followed by a tone. If the number is correct, say "Yes". The system responds "OK, Dialing" and dials the number. If the number is not correct, say "No". The system will ask for the number again. b / g. . For vehicles without a navigation system, the system responds "Ready", followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone say "Hands Free". The system responds "Ready", followed by a tone. 3. Say the digits to be dialed one at a time. The system repeats back the digit it heard followed by a tone. 4. Continue entering digits until the number to be dialed is complete. After the whole number has been entered, say "Dial". The system responds "OK, Dialing" and dials the number. . . If an unwanted number is recognized by the system, say "Clear" at any time to clear the last number. To hear all of the numbers recognized by the system, say "Verify" at any time. 2. Say "Digit Dial". The system responds "Digit dial using , please say the first digit to dial", followed by a tone. .