2012 Buick LaCrosse Owner's Manual - Page 102

3-46 Seats and Restraints . but you can install two of them. If you want to do this, install one LATCH child restraint in the passenger-side position, and install the other one either in the driver-side position or in the center position. If you need to install child restraints in both the center and driver‐side position, the one in the center seating position will need to be secured using the vehicle safety belts instead of the LATCH anchors. Refer to the following illustration to learn which anchors to use. A. Passenger Side Rear Seating Position and Lower Anchors 1 and 2 B. Center Rear Seating Position and Lower Anchors 3 and 4 C. Driver Side Rear Seating Position and Lower Anchors 4 and 5 There are five lower LATCH anchors in the rear seat. . Use anchors 3 and 4 when installing a child restraint using LATCH in seating position B. Use anchors 4 and 5 when installing a child restraint using LATCH in seating position C. . Installing child restraints using LATCH in seating positions B and C at the same time is prohibited. Make sure to attach the child restraint at the proper anchor location. This system is designed to make installation of child restraints easier. When using lower anchors, do not use the vehicle's safety belts. Instead use the vehicle's anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether. 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have Use anchors 1 and 2 when installing a child restraint using LATCH in seating position A.