2012 Buick LaCrosse Owner Manual - Page 251

Infotainment System Changing Bluetooth Code The default Bluetooth code should work with most mobile phones. If you are having difficulty pairing your mobile phone, you can change the code at any time. 1. Press the CONFIG button. 2. Select Phone Settings, or touch Phone on a navigation radio. 3. Select Bluetooth. 4. Select Change Bluetooth Code. 5. Enter a new four-digit code, then select OK. Ring Tone There are three different ring tones available for the UHP system. To change the ring tone: 1. Press the CONFIG button. 2. Select Phone Settings, or touch Phone on a navigation radio. 3. Select Ring Tones. 4. Select Ring Tone 1, 2, or 3. . 7-71 Default Settings Selecting this option will reset the ring tones and the Bluetooth code. . Pairing A Bluetooth enabled mobile phone must be paired to the UHP system first and then connected to the vehicle before it can be used. See the mobile phone manufacturer's user guide for Bluetooth functions before pairing the mobile phone. Pairing Information: . Pairing should only need to be completed once, unless changes to the pairing information have been made or the mobile phone is deleted Using UHP with Infotainment Controls Pairing a Phone If your mobile phone has simple pairing or auto discovery features, they need to be turned off before the mobile phone can be paired to the UHP system. Reference the mobile phone manufacturer's user guide for information on these features. 1. Press the CONFIG button. 2. Select Phone Settings, or touch Phone on a navigation radio. 3. Select Bluetooth. Up to five mobile phones can be paired to the UHP system The pairing process is disabled when the vehicle is moving The UHP system connects with the first available paired mobile phone in the order the phone was paired Only one paired mobile phone can be connected to the UHP system at a time . .