2013 Buick LaCrosse Owner Manual - Page 192

7-30 Infotainment System 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press b / g to link all callers together. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN. To Transfer Audio from the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an incoming call when another call is active. The original call is placed on hold. Press b / g again to return to the original call. To ignore the incoming call, no action is required. Press 0 / c to disconnect the current call and switch to the call on hold. Ending a Call Press . 0 / c to end a call. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press b / then say "Mute Call." . b / g. 2. Say "Transfer Call." To Transfer Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press b / g. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information. . g , and g , and Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press 2. Say "Three-way call." To cancel mute, press b / then say "Un-mute Call." Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. b / g.