2013 Buick LaCrosse Owner Manual - Page 345

Vehicle Care Storing a Flat or Spare Tire and Tools Storing a Flat or Spare Tire and Tools With a Screw in Fastener 10-85 6. Place the floor cover on the wheel. Storing a Flat or Spare Tire and Tools With a Slide In Fastener 1. If the flat tire is larger than the spare tire, use the longer mounting bolt. { WARNING Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. Store the spare or flat tire in one of the ways shown below. Storage instructions will vary depending on the bolt that came with the vehicle and how it attaches to the vehicle. This vehicle will have a slide in fastener or a screw in fastener. 1. Turn the wrench counterclockwise to remove the fastener. 2. Replace the fastener with the one provided in the foam. 3. Turn the wrench clockwise to tighten the fastener. 4. Replace the foam, jack and tools, and the tire. 5. Turn the retainer nut clockwise to secure the tire. 2. Slide the shorter bolt to remove it from the floor and insert the longer one. 3. Replace the jack and tools in their original storage location.