2015 Buick Enclave Owner Manual - Page 330

Vehicle Care The bright metal moldings on the vehicle are aluminum or stainless steel. To prevent damage always follow these cleaning instructions: . 10-75 Cleaning Exterior Lamps/ Lenses, Emblems, Decals and Stripes Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals and stripes. Follow instructions under "Washing the Vehicle" previously in this section. Lamp covers are made of plastic, and some have a UV protective coating. Do not clean or wipe them when dry. Do not use any of the following on lamp covers: . . . Aftermarket appearance caps or covers while the lamps are illuminated, due to excessive heat generated. Be sure the molding is cool to the touch before applying any cleaning solution. Use a cleaning solution approved for aluminum or stainless steel. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings. Always dilute a concentrated cleaner according to the manufacturer 's instructions. Do not use chrome cleaners. Do not use cleaners that are not intended for automotive use. Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish. { Caution Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty. . . { Caution Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only. . . Abrasive or caustic agents. Washer fluids and other cleaning agents in higher concentrations than suggested by the manufacturer. Solvents, alcohols, fuels, or other harsh cleaners. Ice scrapers or other hard items. . . Air Intakes Clear debris from the air intakes, between the hood and windshield when washing the vehicle. .