2015 Buick Enclave Owner Manual - Page 55

3-6 Seats and Restraints Memory Remote Recall The memory feature can recall the driver seat, outside mirrors, and power steering column (if equipped) to stored positions when entering the vehicle. To activate, unlock the driver door with the Remote Keyless Entry (RKE) transmitter. The driver seat, outside mirrors, and power steering column will move to the memory positions associated with the transmitter used to unlock the vehicle. This feature is turned on or off using the vehicle personalization menu. See Vehicle Personalization on page 5-38. To stop recall movement, press one of the power seat controls, memory buttons, power mirror buttons, or the power steering column control (if equipped). If something has blocked the driver seat and/or steering column while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service. Easy Exit Positions The easy exit feature can move the driver seat rearward and the power steering column (if equipped) up and forward to allow extra room to exit the vehicle. Storing Memory Positions To save into memory: 1. Adjust the driver seat and seatback recliner, both outside mirrors, and the power steering column (if equipped). Not all vehicles will have the ability to save and recall the mirror positions. 2. Press and hold "1" until two beeps sound. 3. Repeat for a second driver position using "2." To recall, press and release "1" or "2." The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, and power steering column (if equipped) will move to the positions previously stored for the identified driver. S (Easy Exit Positions): Press to activate the recall. The vehicle must be in P (Park). If this feature is programmed on in the vehicle personalization menu, automatic driver seat and power steering column movement occur when the ignition key is removed.