1994 Cadillac Fleetwood Owner's Manual - Page 170

The display will showeither 3 or 4 digits and the preset button"LED" will flash. In the farthest right position of the display willbe an"F" (for factory setting), or if the equalization has been modified, a "U" (for user setting). Press the SCAN switch up ordown to select the band you prefer. The middle digitindicates the equalization band. There arefive bands 60Hz, 250Hz, lkHz, 3.5Hz and lOkHz, numbered 1 through 5 respectively. The band will display band 1when the mode is first entered. Press the SEEK switch up or down to select the gain setting you want. The left digit, or two digits are theequalization gain settings (0-15) for each band. The display will indicate the active setting (F or U) when the mode is first entered. A typical setting for a flat response is 7. 0 Press the upper radio knob to compare the factory setting to your setting. Once you are satisfied with yourselection, press and hold the 4 preset equalization button for about seconds, the" Pr" (program) will display indicating that your selection is programmed. If you haveprogrammed the presetequalization buttons and set thepush buttons to thestations you've selected, you can preset thefive Preset Equalization buttons to a particular station. Just: Tune in a station using one of the preset push buttons. 157