1999 Cadillac Catera Owner's Manual - Page 97

yellowblue Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. The lever returns when it is released. Arrows that flash rapidly when signaling for a turn or lane change may be caused by a burned-out front signal bulb. (This does not occur with a burned-out rear bulb.) Other drivers won't see the turn signal. Replace burned-out bulbs to help avoid possible accidents. Check the fuse (see "Fuses and Circuit Breakers" in the Index) and for burned-out bulbs if the arrow fails to work when signaling a turn. With the Twilight SentinelR on or with the lamp control dial turned to the headlamp position, push the turn signal lever on the driver's side of the steering wheel away from you to turn on the high-beam headlamps. This light on the instrument panel will be on, indicating high-beam usage. Pull the lever back to the original position to return to low-beam headlamps. For more information, see "Headlamps" in the Index. Flash-To-Pass This feature uses the high-beam headlamps to signal the driver in front of you that you want to pass. This feature will work with either the headlamps on or off. To use, pull the turn signal lever toward you and release. Windshield Wipers Headlamp High/Low Beam WIPER: Move the lever on the passenger's side of the steering wheel up and down to control the wipers. 2-35