1999 Cadillac DeVille Owner's Manual - Page 97

yellowblue D If the headlamps are on low beam, they will shift to high beam and stay there. Pull the lever toward you to return to low beam. to low beam. To return to high beam, pull the lever toward you. LO or HI: Turn the band away from you to either LO (low speed) or to HI (high speed), depending on the wiper speed you want. DELAY: You can set the wiper speed for a long or short delay between wipes with this setting. Turn the band to the DELAY position. The closer you move it to LO, the shorter the delay. (DeVille Only) OFF: Turn the band to OFF to turn off the wipers. Be sure to clear ice and snow from the wiper blades before using them. If they're frozen to the windshield, carefully loosen or thaw them. If the blades do become damaged, get new blades or blade inserts. Heavy snow or ice can overload the wiper motor. A circuit breaker will stop the motor until it cools. Clear away snow or ice to prevent an overload. D If the headlamps are on high beam, they will switch Windshield Wipers Rainsenset Wipers (DeVille d'Elegance and DeVille Concours Only) WIPER: Turn the band on the turn signal lever to control the wipers. MIST: Turn the band toward you and then release it for a single wiping cycle. For more cycles, hold the band on MIST longer. This moisture sensor is mounted on the passenger's interior side of the windshield behind the rearview mirror and is used to automatically operate the wipers by monitoring the amount of moisture that is on the windshield. 2-37