2002 Cadillac DeVille Owner's Manual - Page 11

Memory Seat, Mirrors and Steering Wheel (If Equipped) The controls for these features are located on the driver's door panel, and are used to program and recall memory settings for the driver's seating positions. 3. Within five seconds, press button 1. A single beep will sound through the driver's side front speaker to let you know that the position has been stored. A second mirror, seating and steering wheel position can be programmed by repeating the above steps and pressing button 2 (for driver 2). Each time a memory button is pressed, a single beep will sound. Each time button 1 or 2 is pressed and released while the vehicle is in PARK (P), the memory positions will be recalled. If the vehicle is not in PARK (P), the memory buttons must be pressed and held to recall the stored positions. If you use the remote keyless entry transmitter to enter your vehicle, automatic seat and mirror movement will occur. The numbers on the back of the transmitters, 1 and 2, correspond to the numbers on the buttons on the door panel. When the key is placed in the ignition in OFF if you have entered the vehicle without using the remote keyless entry transmitter, the seats and mirrors will automatically adjust to the programmed position of the last driver. To stop recall movement of the memory feature at any time, press one of the power seat controls or memory buttons. Use the following steps to program each button: 1. Adjust the driver's seat (including the seatback recliner, lumbar, head restraint and shoulder belt height adjustments), both outside mirrors and the steering wheel to a comfortable position. 2. Press the SET button. 1-5