2002 Cadillac DeVille Owner's Manual - Page 112

Headlamp High/Low-Beam Changer Push forward to change the headlamps from low beam to high. Pull the lever back and then release it to change from high beam to low. This light on the instrument panel cluster will be on, indicating high-beam usage. Windshield Wipers Flash-To-Pass This feature lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use. When you do, the following will occur: WIPER: Turn the band on the turn signal lever to control the wipers. MIST: Turn the band toward you to MIST and then release it for a single wiping cycle. For more cycles, hold the band on MIST longer. LO or HI: Turn the band away from you to either LO (low speed) or to HI (high speed), depending on the wiper speed you want. DELAY: Turn the band to one of the DELAY positions to set the wiper speed for a long or a short delay between wipes. The closer you move it to LO, the shorter the delay. OFF: Turn the band to OFF to turn off the wipers. D If the headlamps are either off or in the Daytime Running Lamps (DRL) mode, the high-beam headlamps will turn on. They'll stay on as long as you hold the lever there. Release the lever to turn them off. D If the headlamps are on high beam, they will switch to low beam. To return to high beam, push the lever away from you. 2-44