2003 Cadillac Escalade Owner's Manual - Page 362

9. Remove the rubber, circular-shaped bulb cap of the affected bulb from the headlamp assembly. 6. Remove the vertical from pin the headlamp assemblybyturningthe end of the pinawayfrom you it until unsnaps and then pulling it upward. 7 . Remove the headlamp assembly by lifting it up and then pulling it out and away from the front of the vehicle. 8. Disconnectelectrical the connector from the lower corneroftheheadlampassembly. This willgive you better access to the headlamp assembly. the 10. Turn the bulb connector counterclockwise and remove it with the old bulb from the headlamp assembly. 11. Unplug the electricalconnector from the old bulb. 12. Plug the in electrical connector the to new bulb, using care not to touch the bulb with your hands, fingers or anything damp or oily. 13. Place the connector with the new bulb into the headlamp assembly and turn it clockwise until it is tight. 14. Reinstalltherubber, circular-shaped bulb cap onto headlamp assembly. 15. Reconnect the electrical connector to the lower corner of the headlamp assembly. 5-59