2004 Cadillac CTS-V Owner's Manual - Page 121

Vehicle Personalization Memory Seat and Mirrors If your vehicle has the memory feature, you can program and recall memory settings for the driver's seating and outside rearview mirror driving positions for up to two drivers. The buttons for this feature are located on the driver's door armrest. 2. Press and hold button 1 for at least three seconds. Two beeps will sound to confirm that the seat and mirror positions have been saved. 3. Repeat the procedure for a second driver using button 2. If your vehicle has an automatic transmission, the vehicle must be in PARK (P) to recall the stored driving positions. If your vehicle has a manual transmission and the engine is running, the parking brake must be set to recall the memory seat driving positions. The stored driving positions can be recalled without setting the parking brake if the vehicle is off. Press one of the numbered memory buttons to recall the stored setting. Each time a memory button is pressed, a single beep will sound. Three chimes will sound and the setting will not be recalled if you press button 1 or 2 when the vehicle is not in PARK (P) on an automatic transmission or the parking brake is not set on a manual transmission. Use the following steps to program the buttons: 1. Adjust the driver's seat including the seatback recliner and both outside mirrors. If you would like the stored driving positions to be recalled when unlocking your vehicle with the remote keyless entry transmitter or when you place the key in the ignition, see DIC Vehicle Personalization on page 3-79. To stop recall movement of the memory feature at any time, press one of the power seat or mirror controls. 2-55