2004 Cadillac CTS-V Owner's Manual - Page 131

If your vehicle is equipped with the Navigation system, do the following: 1. Press the MAIN button located to the lower left of the display. 2. Press the multi-function button next to the Setup prompt at the right of the display. 3. Press the multi-function button next to Prog SWC located at the right of the screen. 4. Turn the TUNE/SEL knob to scroll through the available functions. 5. Once the function desired is highlighted, press and hold the multi-function button next to the control you wish to program (1, 2, 3 or 4). The buttons are located at the right of the display. When a control is successfully programmed, the function you selected will appear next to the number of the control at the right of the display. 6. Press the multi-function button next to the Back prompt to exit each menu. If you desire to program another control, repeat the procedure. Each function can only be used once. When you program a control with a function, that function is removed from the list of functions available. It will return to the list if you remove it from the SWC it is programmed to by programming another function to that control. Turn Signal/Multifunction Lever The lever on the left side of the steering column includes the following: Turn and Lane-Change Signals Headlamps Headlamp High/Low Beam-Changer Flash-To-Pass Feature Fog Lamps Cruise Control For more information on the exterior lamps, see Exterior Lamps on page 3-20. 3-9